Nodopur – Meter Mix and Dispense Machines for liquid resins

  • Nodopur 2K
  • Nodopur VS
  • Nodopur VS AR
  • Nodopur VS AR B 1000
  • Nodopur VS AR VF
  • Nodopur VS FF
Nodopur 2K | 2K Meter Mix and Dosing Machine

Nodopur 2K | 2K Meter Mix and Dispense Machine

Dosing system for the efficient processing of liquid, two-component synthetic resins

System for processing liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 13 l/min (depending on viscosity, mixing ratio and hose length).

Technical data

Applications
  • Prototyp component fabrication
  • Electric-grouting
  • Adhesive machining
  • RTM (Resin Transfer Molding)
  • Laboratory use
  • Spray uses
Metering pump drive 2 electric drive motors from 0.37 kW to 2.2 kW, 400 V with frequency converter
Mixing ratio
  • 100: 10 up to 10:100 (depends on pump combinations)
  • Adjustable via frequency converter
Output Variable from 0.1 up to 13.0 l/ min, fitted within the range 1:10 (depends on pumps)
Control
  • Great or small circulation of the components
  • Shotsize-timer
  • Potlife-timer
Tank 3 l, 5 l ,10 l, 30 l oder 60 l stainless steel
Heating Available for tanks, hose and mixing head
Compressed air
  • Standard: 400 l / min
  • Spraying: ca. 1000 l / min
Power supply
  • 415 Volt, 50 Hz, depends on final
    specification
  • other voltages on request
Hose length 1,5 m, 3 m, 5 m
Mixing head LC 5/2, LC 5/3 , LC 5/3 M, LC 5/4, LC 5/4 R, LC 6/2 or LC 6/3
Additional equipment
  • Spray equipment
  • automatic refilling of component tanks 30 l or 60 l
Download Datasheet (510.9 KiB)
Nodopur VS | 2K Meter Mix and Dosing Machine

Nodopur VS | 2K Meter Mix and Dosing Machine

Dosing system for the processing of liquid synthetic resins, with volume flow control

Volume-flow controlled system for the precise processing of polyurethane resin or epoxy resin with an output of up to 50 l/min (depending on viscosity, mixing ratio and hose lengths).

Technical data

Applications
  • Prototyp component fabrication
  • Electric grouting
  • Adhesive machining
  • RTM (Resin Transfer Molding)
  • Liquid PU-paste machining
Metering pump drive Frequency controlled motor from 0.37 up to 2.2 kW
Mixing ratio Automatic regulation through flow rate measurement for components
Output Up to 50 l/min at MV 100 : 100 possible, at range 1:10 adjustable
Control Siemens SPS
Tank 3, 5, 10, 30, 60, 100 l possible
Heating Available for tanks, hose and mixing head
Compressed air
  • Casting ca. 650 l/ min, 6- 8 bar
  • Spraying ca. 1000 l/ min, 6- 8 bar
Power supply
  • 380/415 Volt, 50 Hz, depends on equipment
  • special voltage on request
Hose length 3 m, 5 m, 10 m, special length possible
Mixing head LC 5/2, LC 5/3, LC 5/4, LC 5/4 R, LC 6/2, LC 6/3
Additional equipment
  • Multi-component machines possible
  • Spraying attachment
  • Automatic refilling of the 30 l, 60 l or 100 l material container
  • Handling arm with 1.65 m
Download Datasheet (485.4 KiB)
Nodopur VS AR | 2K Meter Mix and Dispense Machine

Nodopur VS AR | 2K Meter Mix and Dispense Machine

Dosing system for the efficient processing of liquid, two-component synthetic resins

System with volume flow control and automatic refill for processing polyurethane resin or epoxy resin with an output of up to 13 l/min (depending on viscosity, mixing ratio and hose length).

Technical data

Applications
  • Liquid PU-Paste processing
  • Duplicate part-production
  • Electro grouting
  • Adhesive processing
  • RTM (Resin Transfer Molding)
Metering pump drive Frequency controlled motor from 0.37 up to 2.2 kW
Mixing ratio Automatic regulation through flow rate measurement for components
Output Up to 50 l/min at MV 100:100 possible, at range 1:10 adjustable
Control Siemens SPS with control panel for monitoring and regulation of all machining and process parameter
Tank 3, 5, 10, 30, 60, 100 l possible; in stainless steel
Refilling Automatically
Heating Available for tanks, hose and mixing head
Compressed air
  • Casting ca. 650 l/min, 6-8 bar
  • Spraying ca. 1000 l/min, 6-8 bar
Power supply
  • 380/415 Volt, 50 Hz, depends on equipment
  • Special voltage on request
Hose length 3 m, 5 m, 10 m, special length
Mixing head LC 5/2, LC 5/3, LC 5/4, LC 5/4 R, LC 6/2, LC 6/3
Additional equipment
  • Multi-component machines possible
  • Spraying attachment
  • Handling arm with 1.65 m
Download Datasheet (541.5 KiB)
Nodopur VS AR B 1000 | 2K Meter Mix and Dispense Machine

Nodopur VS AR B 1000 | 2K Meter Mix and Dispense Machine

Dosing system for the efficient processing of liquid, two-component synthetic resins

System with volume flow control and automatic refill from IBC tanks for processing polyurethane resin or epoxy resin with an output of up to 50 l/min (depending on viscosity, mixing ratio and hose length).

Technical data

Applications
  • Liquid PU-Paste processing
  • Duplicate part production
  • Electric grouting
  • RTM (Resin Transfer Molding)
Metering pump drive Frequency controlled motor from 0.37 up to 2.2 kW
Mixing ratio Automatic regulation through flow rate measurement for components
Output Up to 50 l/min. at MV 100:100 possible
Control Siemens SPS with control panel for monitoring and regulation of all machining and process parameter
Tank 60, 100 and 200 l possible; in stainless steel
Refilling Automatically from IBC
Heating Available for tanks, hose and mixing head
Compressed air
  • Casting ca. 650 l/min, 6-8 bar
  • Spraying ca. 1000 l/min, 6-8 bar
Power supply
  • 380/415 Volt, 50 Hz, depends on equipment
  • special voltage on request
Hose length 5 m, 10 m; special length
Mixing head LC 5/2, LC 5/3, LC 5/4, LC 5/4 R, LC 6/2, LC 6/3, LC 8/2
Additional equipment
  • Multi-component machine possible
  • Spraying attachment
  • Handling arm 4 mtr.
  • Pulling unit
  • Dispenser for air and electricity
Download Datasheet (570.6 KiB)
Nodopur VS AR VF | 2K Meter Mix and Dispense Machine with vacuum supported follower plate deaeration

Nodopur VS AR VF | 2K Meter Mix and Dispense Machine with vacuum supported follower plate deaeration

Dosing system for the efficient processing of liquid, two-component synthetic resins

System with volume flow control and automatic refill from IBC tanks for processing polyurethane resin or epoxy resin with an output of up to 20 l/min (depending on viscosity, mixing ratio and hose length).

Technical data

Applications
  • RTM (Resin Transfer Molding)
  • Vacuum infusion
  • Electric grouting
Metering pump drive Frequency controlled motor from 0.37 up to 2.2 kW
Mixing ratio Automatic regulation through flow rate measurement for components
Output
  • Up to 20 l/min. at MV 100:100
  • Possible versions: 100:20-40, 100:40–120
Control Siemens SPS with control panel for monitoring and regulation of all machining and process parameter
Tank 30, 60, 100, 450, 1000 l available; in stainless steel
Refilling Automatically in vacuum conditions
Heating Available for tanks, hose and mixing head
Compressed air Casting ca. 650 l/min, 6-8 bar
Power supply
  • 380/415 Volt, 50 Hz, depends on equipment
  • special voltage on request
Hose length 3 m, 5 m, 10 m; special length
Mixing head LC 5/2, LC 5/3, LC 5/4, LC 5/4 R, LC 6/2, LC 6/3
Additional equipment
  • Multi-component machine possible
  • Spraying attachment
  • Handling arm 1.65 mtr.
Download Datasheet (645.1 KiB)
Nodopur VS FF | 2K Meter Mix and Dispense Machine with automated refill from IBC tanks

Nodopur VS FF | 2K Meter Mix and Dispense Machine with automated refill from IBC tanks

Dosing system for the efficient processing of liquid, two-component synthetic resins

System with volume flow control and automatic refill from IBC tanks for processing polyurethane resin or epoxy resin with an output of up to 100 l/min (depending on viscosity, mixing ratio and hose length).

Technical data

Applications
  • Prototyp component fabrication
  • Electric grouting
  • Adhesive processing
  • RTM (Resin Transfer Molding)
  • Spraying applications
Metering pump drive Frequency controlled motor 1.5 kW
Mixing ratio
  • 100:10 up to 100:100
  • Adjustment by input via the control unit
Output Up to 100 l/min at MV 100:100 possible, adjustable at range 1:10
Control Siemens SPS with control panel at control desk
Tank 3 l, 5 l, 10 l, 30 l or 60 l available
Heating Available for tanks, hose and mixing head
Compressed air
  • Casting: 6500 l/min, 6-8 bar
  • Spraying: ca. 1200 l/min, 6-8 bar
Power supply 380/415 Volt, 50 Hz
Hose length 3 m, 5 m and special request
Mixing head LC 5/2, LC 5/3, LC 5/4, LC 5/4 R, LC 6/2, LC 6/3
Specials
  • Spray-equipment
  • Handling arm for mixing head
  • vacuum degasing device
  • automatic
    refilling of component tanks directly from 200 l drums or 1000 l containers
Additional equipment
  • Flow rate control with Siemens SPS
  • Handling arm 1,65 mtr.
to the shop